metal slatted bed frame base bedstead

Product Features

1. Military-grade load-bearing structure

The bed frame uses 1.2mm thick Q235 carbon steel pipe (tensile strength ≥400MPa), and forms a closed-loop force system through CO2 gas shielded welding process. The slats are made of imported poplar/birch wood, which is carbonized at 120℃ and the moisture content is controlled in the range of 8%-10%, effectively preventing cracking and deformation.

2. Silent shock absorption technology

The bottom of the bed legs is embedded with TPE polymer plastic caps, and the 3mmEVA cushion between the slats and the metal frame is used to achieve triple noise reduction.

3. Environmental and safety certification

Passed SGS formaldehyde emission test (≤0.05mg/m³, 5 times better than national standard E1 level), all metal parts implement RoHS 2.0 standard (6 harmful substances limit ≤0.1%). The slat frame adopts FSC certified wood, and the carbonization process reduces the xylose content by 70%, effectively inhibiting the growth of mold (anti-mold level 0).

4. Ultra-efficient logistics solution

Adopting normal packaging design.

Application scenario

1. Star hotel project

Adopting 180cm×200cm customized specifications, the guest room bedding replacement efficiency is increased by 30%, and the annual average maintenance cost is reduced by 60%.

2. Standardization of long-term rental apartments

The 90cm×200cm basic model is selected, and 7 types of apartment types can be adapted through modular design. The separate structure of the bed frame and the slat frame extends the cleaning cycle to 90 days/time.

3. Student dormitory renovation

The 150cm×200cm heightened model (bed leg height 40cm) is used, and storage space is reserved at the bottom. With anti-slip plastic foot pads, the floor scratch rate is reduced from 15% to below 2%.

4. Short-term rental operation of homestay

The landlord chose the 150cm×200cm detachable model, which was equipped with a quick-release joint design to shorten the room renovation cycle from 8 hours to 1.5 hours, and the annual praise rate increased by 27%.

FAQ

Q: What is the maximum load-bearing capacity of the bed frame?

A: Static load-bearing capacity is 300KG (evenly distributed), and dynamic load-bearing capacity is 200KG (concentrated load). It is recommended to avoid violent actions such as jumping on the edge of the bed, as long-term overloading may cause metal fatigue.

Q: How to clean and maintain the wooden slatted frame?

A: Use a soft brush to remove dust every month, and use wood wax oil (beeswax-based products are recommended) for maintenance every quarter. Avoid direct sunlight or air conditioning to prevent the wood from drying and cracking.

Q: What should I do if the bed frame has an odor?

A: The new bed frame may have a slight metal processing odor, which can be dissipated after ventilation for 3-5 days. If you are sensitive to odors, you can choose the electrogalvanized surface treatment process (no spray odor).